声明Push button switch
26-12.
- Single- or two-pole design
- 20.000 cycles
- Material acc. UL 94 V0
- Operation mode: impulse
This switch can be exchanged for an SMT-switch type 26-62 without changing the front-panel layout. The mechanical fixation on the PCB is done by a plastic fixation peg or a solderable metal peg. Special designs on request.
| Fixation mode | THT |
| Pitch | 2.54 mm |
| Number of poles | 1 or 2 pole |
| Number of switching positions | 2 max. |
| Mechanical lifetime | 20.000 operations |
| Electrical lifetime | min. 10.000 actuations |
| Function | impulse |
| Switching mode | break before make |
| Operating force | approx. 4.0 N |
| Operating travel | 2.5 mm |
| Vibration | > 5.0 g |
| Shock test | > 10.0 g |
| Resistance against cleaning fluids | yes |
| Operating temperature | -40 °C ... +85 °C |
| Switching voltage | 60~/75- V |
| Contact load, dynamic | 0.5 A |
| Standby current | ≤ 1.0 A A |
| Contact rating max. | 10 VA |
| Test voltage | 500.0 V 50Hz |
| Contact resistance initial | < 80.0 mΩ |
| Insulation resistance | >10.000 MΩ |
| Insulations class | VDE 0110 Gr. C |
| ESD protection | > 10.0 kV |
| Housing | PA6.6 GF30 |
| Flammability | UL94V0 |