声明SMT-Push-Button-Switch
26-62.
- Single- or two-pole design
- Detent mechanism possible
- 8.0 kV ESD protection
- Two switch styles (break before make, make before break)
- Two operation functions ( impulse, independent release)
SMT-push-button switch to be used as an alternative to THT-switch 26-12 without changing the front-panel layout. The mechanical fixation on the PCB is realized by two solderable fixing-plates. For additional fixation, the switch can have two plastic-fixation-pegs. Special versions on request.
| Fixation mode | SMT |
| Number of poles | max. 2 pole |
| Coplanarity of the solder pins | ≤ 0.1 mm |
| Electrical lifetime | min. 10.000 actuations |
| Switching mode | break before make / short |
| Operating travel | 2.5 mm |
| Operating force | < 4.0 N |
| Function | impulse or single snap |
| Number of poles | 1 or 2 pole |
| Operating temperature | Single Snap version-25 °C ... +85 °C |
| Operating temperature | Impulse version -40 °C ... +105 °C |
| Degree of protection | Dust proof |
| Switching voltage | 60~/75- V |
| Contact load, dynamic | 0.5 A |
| Standby current (20 °C) max. | 1.0 A |
| Contact rating max. | 10 VA |
| Test voltage | 500.0 V 50Hz |
| Contact resistance initial | ≤70.0 mΩ |
| Contact resistance after life test with max. load | ≤70.0 mΩ |
| ESD protection | 8.0 kV |
| Soldering | Tape and reel, 350 pcs. per reel |