PTR Hartmann

Product Configurator

Here you can choose the features of your product according to your requirements. The order code will be created dynamically and displayed.

1 Contacts

2 Operating function

3 Housing color

4 Toggle color

5 Sealing

6 Toggle design

7 Switch design

Order code:
Download PDF
THT-Toggle switch

22-04. THT

  • 20.000 switching cycles
  • Sealed
  • Max. 3 positions
  • Up to 7 detent and two push button functions possible

Toggle switch in single pole design. For mechanical fixation on the PCB, there is, apart from the tongue and groove system, room for an additional plastic- or metal-fixation-peg, which can be soldered. The toggle-switch is a front-panel-component acc. DIN 41494 for 19'' racks in industrial electronics. This toggle switch is also available in SMT-design with virtually identical dimensions.

Fixation mode THT 
Number of poles 1 pole 
Number of switching positions 3 max. 
Pitch 2.54 mm
Mechanical lifetime 20.000 operations 
Electrical lifetime min. 10.000 actuations 
Operating function detent pos | impulse pos. 
Switching mode break before make 
Operating torque ≤ 5.0 Ncm
Stop strength > 20.0 Ncm
Vibration > 20.0 g 
Shock test > 50.0 g 
Resistance against cleaning fluids yes 
Operating temperature -25 °C ... +95 °C
Switching voltage 60~/75- V
Contact load, dynamic 0.5 A
Standby current (20 °C) max. 2.0 A
Contact rating max. 10 VA
Test voltage 500.0 V 50Hz 
Contact resistance initial < 50.0 mΩ
Insulation resistance >10.000 MΩ
ESD protection 8.0 kV
Housing PA6.6 GF30 
Contacts Au over Ni